In this episode I go from one extreme (10mm) to the other (.32 ACP).

.32 ACP / 7,65mm Browning

John Browning designed this tiny cartridge in 1899 for the delightfully steampunk-looking FN M1900 pistol (inset pic).1 Americans call it .32 ACP (automatic Colt pistol) and Europeans call it 7,65mm Browning.

The .32 ACP was the dominant carry/duty cartridge for individuals and police in the first part of the 20th c. An anecdote about the popularity of the cartridge: one infamous Austrian used a .32 ACP to seal the deal in his underground bunker.

it’s hard to overstate how rapidly the .32 ACP took hold among popular handgun designs. I’d almost call it the 9mm of its age but possibly more significant because of its timing. Droves of other handgun designs popped up well into the middle of the last century because of it. – source

which sidearm?

If a Bersa Thunder 32 had been available at a sane price I would have bird-dogged one down. But they were only released in tiny numbers recently due to overproduction in Argentina.

Actual Walther models are above my pay grade so that left milsurps. I looked for CZ (vz. 50 or vz. 70) and kept bumping into Zastavas. My process looked like this:

  1. identify my max total budget
  2. sort matches in ending first order
  3. backed into a bid for each listing by subtracting shipping and other fees from the max in step 1
  4. bid and lost repeatedly <- no harm, no foul
  5. finally won an auction

1964 CZ vz. 50

facing right facing left

I ended up finding a vz. 50 in ugly-but-shootable condition. All the vz. 50 and vz. 70 were made in export-friendly manner but reportedly the majority were claimed by the Czech government for their own use as a police pistols. My understanding is some relatively small number of those those govt sidearms were assigned to military2 or paramilitary (secret police)3.

My guess is that this one was regular police issue, based on the holster wear patterns and primer sealant crud (see below).

The auction pics seen above were quite good at showing the imperfections in this particular sidearm. Some surface rust, light pitting, and some odd patterns in bluing on the right side of the slide that suggest it was stored in something that affected it. Wrapped in acidic paper or tape? The seller didn’t assign it a Condition rating, but I’d say it’s rougher than GOOD but not as ratty as most FAIR I’ve seen. Maybe FAIRLY GOOD should be a thing. :-) I don’t care about the cosmetics, I want a shooter. If it’s ugly then the better for me because it keeps collectors from driving up the auction price.4

I took it apart for cleaning and sanity checking. It was dirty but not disgusting. It had red stuff on the bolt face like this pic from a vz. 70. It is said to be (wax?) primer sealant and cleaned off easily. This batch of surplus S&B ammo from the 80s shows the kind of sealant that likely caused it.

I used an old toothbrush to knock off any loose crap then used a bronze brush on tougher stuff. I used a bit of Mother’s metal polish on wool bits to polish the feed ramp and to clean up places discolored with rust. Interestingly, there was a piece of ancient vegetation under one of the grip panels so the last time it was taken down might have been in the field somewhere. I’d taken the grips off with some care since the old Bakelite pieces are reported to be increasingly fragile.

care and feeding

Now that it’s been cleaned and lubed with DIY Ballistol it’s time to make some baby food for it. My understanding is there are two approaches:

  • thicker Euro brass (like Prvi Partizan / PPU) and narrower ~0.309” Euro projectiles
  • thinner American brass like Starline and thicker American ~0.312” projectiles

PPU cases are available mail order but I couldn’t find any suitable .309” projos. American Brass and Berry’s 71gr .312” plated RN are widely available so I went that direction. If the vz.50 doesn’t like them then I’ll have to hunt down some PPU projos or resize the Berry’s.

I could get the Berry’s at Cabela’s with the 10% vet discount so that just left the brass and the carbide reloading dies. The only place I could find both in stock to ship with one fee was Shooting Surplus. I was a bit hesitant because their rating on ammoseek was quite mixed. But they were the only place with both in stock at once so I held my nose and hit the Order button. They took 3 business days to ship and it ended up coming from another state altogether. I assume this means they are drop shippers; if so it might explain their… ahhh… uneven performance with inventory management. I guess as long as I get the stuff I shouldn’t whine. But I’m not inclined to rush back to their door.

To keep it from being a Debbie downer end to the post I’ll list my preferred retailers

preferred retailers

  • for local pickup - Cabela’s / Bass Pro Shops. I usually start here because with the 10% vet discount, no ship to store fee, and no hazmat for local pickup reloading components are often cheaper than I can get mail order. I order online and pick it up when the stock is pulled or when ship to store is complete.
    Loaded ammo is only -5% but the only ammo I buy is .22LR.5
  • pulled bullets and powder - all hail American Reloading, at least if you’re not in a hurry. No hazmat or shipping fee over a certain order amount but shipping can be very slow. Use AR to beef up your stock before you need it an you’ll be happy. Raven Rocks also has pulled bullets at fair prices and shipping is always quick.
  • range brass - Smith Werder, sometimes American Reloading
  • retail components and .22LR I can’t get locally – Graf & Sons or Midway USA. Midway sometimes has projo seconds at decent prices, but not as aggressively low as AR or RR.
  1. image by Rustmester under the Creative Commons Attribution 2.0 Generic license ↩

  2. the Czech Army acceptance stamp was crossed swords ↩

  3. the secret police stamp was NB50, thankfully not present on my example ↩

  4. My winning bid was $166. If it functions reliably then I’ll consider it a steal. The pistol and reloading gear to make ammo for it was <$250. Same with the 10mm. ↩

  5. full disclosure: I did buy 9mm and a couple boxes of 8x57mm Mauser before I started ‘loading my own in 2024. 9mm and .308 Win probably don’t make financial sense to load but as a retired graybeard I have more time than money. And I rather enjoy it. More rewarding and less dangerous than drankin’ or chasin’ wimmen. Unpopular calibers like .32 ACP, .380 ACP, and 8x57mm lack economies of scale so handloading can save a lot of money. And of course you get a hobby and the ability to make exactly what you want. ↩

Updated: