circuit breakers

Thinking out loud a bit here.

When I mounted the electrical panel mock-up on the wall I ordered some components for it off Amazon:

  • 12v fuse block.  Only ordered one but will eventually need two, one for normal house loads and one for opportunity loads.

  • [15A self-resetting circuit breakers41xifprvkxl-_ac_us160_](https://boondockplan.files.wordpress.com/2017/05/41xifprvkxl-_ac_us160_.jpg)

  • 40A self-resetting circuit breaker

  • cable clips for keeping wire under control

I’m also going to get a manual reset circuit breaker for between the panels and the charge controller, and between the battery bank and the fuse blocks.  My thinking is that I could manually trip the breakers to disconnect panels or loads.

##

Updated: